Earlier this year, iRobot unveiled the newest Roomba vacuum robot in its lineup, the i3. What stands out most about the i3 is its lower price and support for the iRobot Clean Base — arguably one of the biggest improvements to robot vacuums in a long time.
For those unfamiliar with iRobot’s newest innovation, the Clean Base first launched alongside the Roomba i7 in 2018. It’s essentially an improvement on the typical Roomba charging base that lets the robot empty its dust bin automatically. This saves users from having to empty the bin after each clean manually.
The Clean Base later expanded to both the higher-end Roomba s9 and now the mid-range Roomba i3. While not the only benefit of the i3, the Clean Base goes a long way to making the robot feel much more convenient than previous models.
As with other iRobot Roomba models with the Clean Base, the Roomba i3 comes in the regular ‘i3’ variant without the Clean Base and a more expensive ‘i3+’ variant, which comes with the Clean Base. The only difference is the included base and, if you choose, you can purchase the regular Roomba i3 and get the Clean Base later on if you want. For the purpose of this review, I tested the Roomba i3+ (but since there are no differences between the robots, I’ll refer to it as the i3).
Maybe not the smartest robot, but it cleans well
I have to say that when I first started testing the Roomba i3 review unit, I was quite surprised. My only experience with robot vacuums prior to the i3 involved extensive mapping procedures before I could let the robot freely clean my home.
This was not the case with the Roomba i3, which just figures it out as it cleans. Higher-end Roomba models can make maps of your home and can clean specific areas. I’ve tried other robot vacuums requiring a mapping session where they explore the home and build out a map. The Roomba i3, on the other hand, generates a map as it cleans so users can review which areas of their home the robot vacuumed. It’s worth noting high-end Roombas also do this as well.
Unfortunately, the Roomba i3 is all-or-nothing when it comes to cleaning, but that’s usually how I run robot vacuums anyway, so I didn’t miss having the ability to send it to specific locations of my home.
I had some concerns about the Roomba i3 getting lost, stuck or failing to clean some areas of my home, but so far, that hasn’t been a problem (excluding one instance where it got stuck under my bed, but I was never able to figure out why and it never happened again). iRobot really has outdone itself with the cleaning mechanics here and, while I’m sure some may appreciate the additional intelligence and capability of the higher-end robots, I never felt the need for more than what the i3 offered.
The Roomba i7 features ‘custom cleaning control’ as well as the ability for users to select specific rooms or areas to clean. Users can also create ‘Clean Zones’ and ‘Keep Out Zones,’ none of which are available with the i3. But all these features really do is grant users more control over how and when their Roomba cleans.
That’s not to say the i3 doesn’t have any intelligence features. For one, it’s capable of detecting areas that are extra dirty and performing deeper cleans by increasing suction or going over dirty patches multiple times. The Roomba i3 can also pause a clean to recharge or empty its dust bin into the Cleaning Base and then resuming when it’s ready.
Clean Base might be the best part…
Perhaps the most revolutionary part of testing the Roomba i3 for me was the Clean Base. Even though it’s been around for a while now, this was my first experience testing a robot vacuum with the ability to empty itself. It really makes the experience much better.
With robots I’ve tried in the past, I found myself emptying the bin once every cleaning session — sometimes I could stretch it to once every other session, depending on how long I went between cleans. Emptying the bin was never particularly fun and added an extra level of upkeep to the robot cleaning experience.
However, Clean Base removes this by emptying the bin on the Roomba i3 for you. iRobot says the Clean Base can hold up to 60 bins worth of dirt, which is quite a bit. When I checked my bag, it seemed like it was full. However, the Clean Base never alerted me to the bag being full, and MobileSyrup colleagues who have tested Clean Bases before report that it just keeps packing in the dirt, and the bags can last for a while. Of course, this can depend on your home, how many people live there and whether you have pets.
Speaking of the bag, Clean Base empties the Roomba’s dust bin into special ‘AllergenLock’ Dirt Disposal Bags. Users get a few of these with the Roomba i3, but iRobot also sells these bags separately — there’s a three-pack on the company’s website for $19.99.
… but it’s not perfect
The dirt bags are perhaps one of the biggest issues I have with the Clean Base overall. Recurring costs aside, the bags are incredibly wasteful. They’re built with a special plastic door that can close to keep dirt from spilling out of the bag. While appreciated, the door’s design also prevents people from dumping out the bags when they’re full and then re-using them. It might be possible to use a vacuum to suck dirt out of the hole in the bag, but I didn’t have one to test this theory.
Regardless, it’s incredibly disappointing to see such a wasteful system with the Roomba i3 — and for that matter, any Roomba using a Clean Base. While the bags may last a while, given the ongoing climate crisis and the issues stemming from plastic pollution, a forcibly wasteful system like this is unacceptable.
My other issue with the Clean Base is it’s incredibly loud. When the Roomba i3 docks on the base and starts the emptying process, it sounds like a jet taking off. This is doubly annoying since the i3 likes to empty its bin every time it gets on the base, even if the bin isn’t full. This has resulted in the Roomba going to the base to empty its full bin, getting off the base to vacuum for a few minutes before returning to the base because of a low battery and emptying again while it charges.
This is certainly less of an issue depending on where you place the Clean Base — in my apartment, there isn’t a lot of space so the Clean Base hangs out in the family room where it easily drowns out the sound of the TV with its loud emptying procedure.
Overall, it’s a minor complaint. If you plan to get the Clean Base, try and place it somewhere in your home where the Roomba i3 won’t disrupt you with the loud emptying procedure.
Some users have taken to iRobot’s website to complain about how long the Clean Base lasts, with some saying they’ve had to replace their Clean Base multiple times. I have yet to encounter any issues with my Clean Base aside from the loud volume and wasteful dirt collection bags.
Roomba app works well
It’s also worth taking a moment to acknowledge the work iRobot put into its refreshed Roomba control app. iRobot launched its new app in August, and it looks great. With the Roomba i3, it offers some basic customization features.
For example, you can set ‘Favourite’ cleaning modes, although I didn’t find this option particularly useful given the all-or-nothing approach to cleaning. Presumably, the higher-end Roombas allow users to set locations in their Favourites, which let them send the robot to clean a specific room. The only option i3 users get is a cleaning time limit, which I found wasn’t that useful.
Users can also create cleaning schedules for when the Roomba i3 cleans their home. There are two options for creating schedules. The first is time-based — users can set the i3 to clean at specific times on specific days.
The other, more exciting option is the ‘Automation’ schedule, which lets users set the robot to clean when they leave the house. Users can also set this behaviour to only trigger on select days of the week if they don’t need the robot to vacuum every time they leave.
If I weren’t working from home because of the pandemic, I’d likely set up this option to let the Roomba clean after leaving for work. However, since I’m always at home, I just use the app to start a clean whenever it is convenient for me.
The iRobot Home app includes a cleaning history complete with maps showing where your Roomba cleaned and ‘Dirt Events,’ which are areas where the Roomba i3 focused after noticing more dirt.
Finally, users can connect their Roomba to Google Home or Alexa so they can control their robot with either voice assistant.
The Roomba i3 is very capable
Throughout my testing, the Roomba i3 impressed me with its ability to reliably vacuum my home without running into issues I’ve encountered with other robot vacuums. Even with its basic navigation system, the Roomba i3 consistently avoided obstacles and managed not to get tripped up on furniture.
Sure, you might get added smarts with a higher-level Roomba robot, like the i7 or s9, but for those who don’t want to spend that kind of money, the i3 is a competent, cost-effective alternative.
On its own, iRobot chargers $499.99 for the Roomba i3 robot, but for $749.99, the Roomba i3+ comes with the Clean Base (there’s no difference between the robots). You can buy the Roomba i3 and later pick up a Clean Base on its own if you prefer, but the individual prices mean you’ll pay about $50 more if you do it that way.
However, both the i3 and i3+ were on sale at the time of writing, making both options more reasonably priced. The i3 was $70 off at $429.99, while the i3+ was $100 off at $649.99.
iRobot’s next step up is the i7 and i7+ (again, the only difference is the ‘+’ version includes the Clean Base). The Roomba i7 costs $749.99, while the Roomba i7+ costs $999.99. It’s worth noting the i7 and i7+ are also on sale.
